Section 1 – Cable Pathways
2″ Global Cable Runway
2” Global Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Includes complete hardware, accessories and support options. Offered in both powder coated and zinc plated finishes.
2″ Telco Style Cable Runway
2” Telco Style Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Includes complete hardware, accessories and support options. Offered in both powder coated and zinc plated finishes.
Butt Swivel Splice Kit
The "Swivel" butt splice kit allows you to change elevation vertically at any angle.
Cable Retaining Posts
Cable Retaining Posts provide extra cable depth to existing cable runway installations. Attaches to cable runway side stringers, both 1.5” and 2”. The post is 3/8” x 1-1/2” (9.5mm x 38mm). Choice of powder coated finish.
Cable Runway Center Support Kits
The Center Support Kit attaches Cable Runway to the ceiling. Each kit includes one Center Support Bracket, one re-inforcement beam, two 5/8-11 hex nuts, one 5/8 split lock washer, one 12 inch long threaded rod cover and one J-bolt kit. Use part # 1226 for 2 inch high version. Choice of powder coated finish.
Cable Runway Corner Brackets
The Cable Runway Corner Bracket is used to create intersections between cable runway sections and can be used to form L, T or X type junctions. Manufactured from rectangular (3/8” x 1.5” x .065”) steel tubing (9.53mm x 38mm x 1.65mm). Kit contains mounting brackets and hardware for easy installation. Choice of powder coated finish.
Cable Runway Cross Sections
Use the Cross Section when creating an “X” intersection. Eliminates the stringer at the intersection thus allowing for a smooth flat continued transition. Available in both the 1.5”H Telco Style Cable Runway and 2”H Telco Style Cable Runway. Choice of powder coated finish.
Cable Runway Divider
The Cable Spool Runway Divider. Seperates cables to improve cable managment and control cable to cable distances. The Bracket attaches to the cross member and can move anywhere along it. Kit includes 10 Spools, Bracket, and Hardware.
Cable Runway E-Bends
When installed horizontally creates an easy 90° turn between the individual cable runway parts. Manufactured from rectangular steel tubing and has cross members welded on 23° increments to allow a nice 90° sweep to either side. Choice of powder coated finish.
Cable Runway Elevation Kits
The Cable Runway Elevation Kit supports cable runway above Racks or Cabinets. Can be mounted perpendicular or parallel. Kit includes brackets and assembly hardware. Rack kit requires Rack-to-Runway Mounting Plate (sold separately). Choice of powder coated finish.
Cable Runway End Termination Kits
The End Termination Kit is designed to close off the end of a cable runway section. The kit includes one cross member and two Junction Splice Kits. for 2” Stringer version, use part # 1227. Choice of powder coated finish.
Cable Runway Foot Kit
The Foot Kit secures a single piece of cable runway section to the floor, wall or ceiling. Manufactured from 3/8” thick steel. The kit includes one Butt Splice Kit. Mounting hardware not included. Available in both powder coated and Zinc plated finishes.
Cable Runway L-Shoulder Bracket
The L-Shoulder Bracket allows power cables, conduit and fiber duct to run parallel to the cable runway stringer. The L-Shoulder Bracket comes with 1/4-20 hex screws and attaches to the stringer. Choice of powder coated finish.
Cable Runway Moveable Cross Member
The Moveable Cross Member attaches to the inside of the stringers where a cross member doesn’t exist to allow for the installation of a radius drop. Manufactured from 1/4” thick Aluminum flat bar. Mounting hardware included. Choice of powder coated finish.
Cable Runway Offset Kits
Use our Cable Runway Offset Kit to add runway parallel or perpendicular to the existing one. The kit includes two steel supports, four steel brackets and mounting hardware. Choice of powder coated finish.
Cable Runway Patch Rack Kits
The Cable Runway Patch Rack is designed to attach to the Cable Runway stringer above a rack or cabinet for additional equipment mounting space. Choice of powder coated finish.
Cable Runway Radius Bend
The Radius Bend creates a 90 Degree vertical bend for cable runs. Manufactured from rectangular (3/8” x 1.5” x .065”) steel tubing (9.53 mm x 38 mm x 1.65 mm) with three cross members welded on 23° increments. Choice of powder coated finish.
Cable Runway Radius Drops
Radius Drops attach to the cross member or stringer to help maintain smooth drops of cable. Provides 3 inch (76mm) bend radius. Choice of powder coated finish.
Cable Runway Reducer 18″-12″
The Cable Runway Reducer is the solution for changing runway widths quickly. Each Reducer is 18” long and has two Cross Members. One on the short end and one on the longer end. Each Cable Runway Reducer comes with two splice kits. We recommend using a Center Support Kit when using a reducer. Choice of powder coated finish.
Cable Runway Steel Triangle Support Brackets
The Modular Steel Triangle Support Bracket is manufactured from steel and is designed to support Cable Runway along a wall application J Bolt kit included. Choice of powder coated finish.
Cable Runway Support Brackets
The Support Bracket secures threaded rod to Cable Runway. Finish is black or clear chem film over zinc plating. Please note: Hardware not included and must be ordered separately.
Cable Runway Tee Sections
Use the Tee Section when creating a “T” intersection. Eliminates stringer at the intersection, thus allowing for a smooth flat continued transition. Available in both the 1.5” & 2” Style Cable Runway. Choice of powder coated finish.
Cable Runway Threaded Ceiling Kits
The Ceiling Support Kit is used to attach threaded rod to the ceiling. Finish is black or clear chem film over zinc plating. Please note: Lag bolts not included.
Cable Runway Triangle Support Brackets
The Triangle Support Bracket supports and strengthens cable runway along a wall application. Aluminum is 1/4” thick x 2”W; J-Bolt kit included. Choice of powder coated finish.
Cable Runway Vertical Wall Bracket Kits
The Vertical Wall Brackets are used to secure Cable Runway with 1.5” x 3/8” (38mm x 9.5mm) stringers to the wall. Offered in both powder coated and zinc plated finishes. Sold in pairs.
Cable Runway Wall Angle Support Kits
The Wall Angle Support Kits are designed to support various Cable Runway widths and mounts directly to the wall. J Bolt kit included. Choice of powder coated finish.
Cable Runway Wall to Rack Kit
Wall to Rack Kit helps with providing support for cable between the rack and the wall.
Ceiling Support Brackets
The Ceiling Support Bracket is used to attach threaded rod to the ceiling. Finish is black or clear chem film over zinc plating. Please note: Hardware not included and must be ordered separately.
Global Cable Runway
Global Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Hardware, accessories and support options are available for this product line. Offered in both powder coated and zinc plated finishes.
Grounding Butt Splice Kit-1099-AL-01
Introducing RXL’s Patented Grounding Butt Splice Kit made of 1075 Spring Steel. Reduce your labor costs while saving both time & money.
Junction Splice Kits
Use Splice Kits to connect two sections of Cable Runway. The Heavy Duty versions requires drilling holes in the cable runway stringer. Finish is black chem film over zinc plating.
Rack-To-Runway Mounting Plate Kits
The Rack-To-Runway Mounting Plate installs to the top of a Two-Post or Four-Post Rack. This product can be mounted either parallel or perpendicular. J Bolt kits included. Choice of powder coated finish.
RXL-1001 J-Bolt Kit
The J-Bolt kit can be used for various applications. Kit includes two J-bolts, two nuts and two washers. Sold in black zinc.
RXL-1010 Butt Splice Kit
The Butt Splice Kit is used to connect two sections of Cable Runway. Sold in black zinc.
RXL-1011 Heavy Duty Butt Splice
The Butt Splice Kit is used to connect two sections of Cable Runway. Sold in black zinc.
Slotted Support Bracket
Use our Grounding Kits to provide grounding between cable runway sections and/or racks. The standard kit includes straps and hardware.
Solid Stringer Runway
The Solid Bar Stringer cable runway is a heavier duty version of our Global Cable Runway. The Solid bar stringers allow for a higher weight load capacity often seen in power applications. This version comes with the Telco style crossmember at 9" rung spacing. Threaded holes are drilled at the ends of the pathway and are to be used in the heavy duty splice and or grounding application.
Stringer End Caps
Protects the exposed ends of Cable Runway, Sold in pairs.
Telco Style Cable Runway
Telco Style Cable Runway provides a solution to cable pathway routes. Fully RoHS 2011/65/EU Compliant. Hardware, accessories and support options are available for this product line. Offered in both powder coated and zinc plated finishes.
Threaded Rod
Used to support cable runway from the ceiling. Clear zinc finish.